GASTECH News ›› 

65 Series

GTA-65 SeriesGasTech Australia has used the latest electrochemical technology for the detection of a large number of gas in ppm and ppb levels.

The GasTech’s unique CO sensor has a built in generator cell which will generate a small amount of interference gas over the sensor giving the user a confidence check that the sensor and system is operating as required.

The Built In Test (BIT) is simply activated by placing a magnet between “GAS TYPE” and “RANGE” on the front cover until the green LED starts to brighten. If the BIT is successful and everything is working correctly the green LED will change to Red for a few seconds then returns to Green for normal operation. This gives the user indication that the BIT was successful. Once the test is complete the green LED will dim and the sensor will return to normal operation within 60 seconds. This feature is only compatible with our CO sensors.

 

KEY FEATURES

  • Simple user friendly calibration procedure for routine calibrations
  • Tamper proof construction
  • GasTech large range of standard sensors
  • RFI/EMI Resistant powder coated protective case
  • Gas concentration indicator
  • MTBF 10 years on electronics
  • 10-30VDC operation
  • 4-20mA source output
  • In built automatic sensor test with indication and confirmation (BIT)
  • -20C to +50C operating temp

 

SPECIFICATIONS

Analogue Output 4-20mA
Indication Green LED brightens on increasing gas level
Over range indication Red LED
Relay Outputs One user adjustable SPDT (option)
Input Power 10-30VDC (16-30VDC relay unit)
Response Time 90% full scale response in less than 60 seconds
Operating Temperature  -20˚C to +50˚C
Humidity Range 10-95% non condensing
Accuracy ±5% of reading
Repeatability ±1% of reading
Drift Less than 5% signal loss per year
Weight 450g
Dimensions 115mm x 90mm x 55mm
Enclosure IP65
Warranty 2 Years on sensor and electronics

 

GASES DETECTED

Ammonia (NH3) 0 to 100 ppm in 1 ppm increments
Carbon Monoxide (CO) 0 to 5000 ppm in 1 ppm increments
Chlorine (CL2) 0 to 10 ppm in 0.1 ppm increments
Hydrogen (H2) 0 to 100 ppm in 0.5 ppm increments
Hydrogen Cyanide (HCN) 0 to 50 ppm in 1 ppm increments
Hydrogen Sulfide (H2S) 0 to 200 ppm in 1 ppm increments
Hydrogen Cloride (HCL) 0 to 200 ppm in 1 ppm increments
Nitric Oxide (NO) 0 to 100 ppm in 1 ppm increments
Nitrogen Dioxide (NO2) 0 to 10 ppm in 0.1 ppm increments
Phosphine (PH3) 0 to 1 ppm in 0.01 ppm increments
Sulfur Dioxide (SO2) 0 to 10 ppm in 0.1 ppm increments
Ethylene Oxide (ETO) 0 to 20 ppm in 0.1 ppm increments
Ozone (O3) 0 to 2 ppm in 0.01 ppm increments
Oxygen (O2) 0 to 25% in 0.1 %Vol increments

 

DOWNLOADS